Anchors FD

 

Application and installation

1.  Diameter and depth of the anchor’s insertion hole must correspond with the diameter of the anchor’s body (d). Make sure that the hole’s diameter does not exceed d+0.5.

2.  Insert the anchor with the plug into the hole using a hammer.

3.  The anchor is now ready for the installation of a chosen construction. Fix the construction using proper screw nuts and beds which are supplied along with the anchors.

Anchors FSAD

Application and installation

1.  Diameter and depth of the anchor’s insertion hole in the concrete must correspond with the diameter of the anchor’s body (d). Make sure that the hole’s diameter does not exceed d+0.5.

2.  Place the anchor into the hole and mount the construction.

3.  Place the washer and tighten the nut screw. Additional tightening of the nut screw expands the elastic casing and further stabilizes the anchor in the concrete.